LTC time code reader and high resolution character inserter. Operates on 12 Vdc or line powered.

• full compatiblity with any source of SMPTE/EBU time code
• indicates drop frame, 24, 25 or 30 frames per second modes
• time or user data display is selectable. Provides time code for edit selection and user data for further identification or control purposes
• high resolution 16 X 16 dot character generator. Offers boxed or uniquely bordered characters, reverse character video, two isolated video outputs, continuously variable character position, and frames suppresion switch
• error indicator shows that you're not reading good code, and in the event of an error, the display will freeze on the last valid reading

Size
6.7"/16.7 cm wide, 1.6"/4 cm high, 7"/17.5 cm deep

Weight
1.3 lbs/0.55 kg

Environment
Temperature 32°F to 140°F/0°C to 60°C, Humidity 0% to 95% (no condensation)

Character Generator
Video input - 1 Volt p-p, loop-thru
Video output (2) - Unity gain, 75 ohms

Time Code Input
-30 to +30 dBm, 50% +/-25% duty cycle 1/10 to 8 times (SMPTE) Balance line, 4000 ohms bridging

The TCR680 SMPTE Time Code Reader/Inserter - a valuable addition to your time coding capability and production cost-effectiveness, and and invaluable tool for precise editing.

The Manual in Adobe Acrobat PDF format

Files in Adobe Acrobat PDF format are viewed with Abobe Acrobat Reader. If you do not already have Adobe Acrobat installed on your computer, you should download the free Acrobat Reader from Adobe's web site at www.adobe.com. It is also available from our WEB site here.
Download instructions are available on the Adobe web site. Once you have downloaded the Acrobat Reader you can view PDF documents in your web browser if it supports plug-ins or, if it does not support plug-ins, you can save the file(s) to your hard drive and view them by opening them in Acrobat Reader.

Copyright© 2011 Telcom Research
Last modified: October 16, 2011