System Parameter Confirmation Mode

BN : AXS-019 June 15, 1996

Data confirmation Mode has been added to the AXS firmware version 088. This mode will give a programmer the ability to retrieve the system parameter settings of a remote dialer. Each parameter must be retrieved individually.The procedure to use this feature is as follows:

1. Enter programming mode on a remote dialer as would normally be done.
2. Once in program mode of the remote dialer enter 0991 then press the Enter key. This will put the remote dialer into Data Confirmation Mode.
3. Now enter the System Parameter you wish to see. For example if you wish to see the DTMF On Timer you would enter 026 and the dialer would output the value that is set. Once you have entered the parameter that you want to check do not press the enter key. It would look like the following 026 06
4. To return to normal Program Mode you would enter 0990 then press the Enter key.

If you do not take the dialer out of Data Confirmation mode and sign off the remote dialer, it will automatically be returned to normal mode.

Note: This feature is only available with firmware version 088 or later.

Copyright© 2011 Telcom Research
Last modified: October 16, 2011