Windows 95 Terminal Program (HyperTerminal)

BN : AXS-014 December 18, 1995

To use the terminal program from Windows 95 (HyperTerminal) you must access it in another way other than using SINGLE, TERMINAL from the AXS software program. The following is a description of how to set up Hyperterminal for use with the AXS dialer. This program can be used for programming manually, either local or remote but can not be used for the Download feature of the software.

1. Go to Hyperterminal from the Accessories Menu
2. Double-click Hypertrm.EXE - The Hyperterminal screen comes up along with a Connection Description Box
3. Enter a name, for example AXS, and choose an Icon. Click OK. - The phone number screen appears.
4. Select the Com Port to use. Click OK. - The Port Settings screen appears.
5. Set the port to - 2400 Bits per Second, 8 Data bits, 1 Stop Bit, No Parity, No Flow Control. Click OK.
6. To adjust the terminal properties you click FILE, PROPERTIES, SETTINGS, ASCII SETUP.
7. You can then create a shortcut for the desktop if desired.

You then connect to the dialer you wish to program as normal using DTMF commands through the keyboard.

To put the local dialer into PROGRAMMER MODE if your are going to program a remote dialer you enter Pmh1 when you have connected to the other end and then ***00*# to enter the Remote End into PROGRAMMING MODE. To exit PROGRAMMER MODE you enter P0.

Copyright© 2011 Telcom Research
Last modified: October 16, 2011