Bin Only Programming and Programmable Password
BN : AXS-012 November 24, 1995
General Purpose Bin Only Programming is now available on the AXS with version 085 firmware. This will allow programming access only to the General Purpose Bins that are used to store the DID numbers, Local Node Numbers and / or Pin Numbers for Callback or Fax Store and Forward. The entire program can not be accessed through this code. The code is ****0*#.
A system parameter has been added in junction with the above that will allow you to program a Bin Only Programming Password. The Password is independent of any programming access code that you may have programmed into the system.
BIN ONLY PROGRAMMING PASSWORD
Code 010XX
Parameters XX = 1-8 digit password
Description Entering a Bin Only Password enables access to Bins Only Programming Mode which allows programming of the General Purpose Bins without allowing access to the dialers entire program. This password will prevent unauthorized access to programming.
Default = None
To use Bin Only Programming;
1) Go Off-Hook on the telephone connected to the dialer.
2) Enter the Bin Only Programming Code ****0*#
3) Dialer will return a 'D' tone as confirmation of entry into programming mode.
4) If required enter the Bin Only Programming Password.
5) Dialer will return a 'D' tone as confirmation of the entry of the correct password.
6) Enter the Bin Number and number you wish to program followed by *#.
7) Dialer will return a 'D' tone as confirmation of the entry.
8) Repeat step 5 to enter other Bin numbers or Hang up to exit Program Mode.