Call Progress Feature

BN : AXS-010 August 23, 1995

1. If you have installed a program into a dialer and it does not seem to be functioning properly you can activate a Call Progress feature that will allow you to see each instruction as it is executed. This will allow you to see at which instruction the program is failing. The display will show the instructions from both the Drop and Parallel programs simultaneously. A partial printout follows:

90 92 75 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 64 70 64 70 64 70 64 70 64 70 64 70 64 70 64 70 57 70 91 70 58 70 90 00 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 6060 60 60 60 60 60 60 60 60 93 95 99 99 99 99 99 99...

The Drop program used here is 90/92/75/700/00 which is bolded. The parallel program is 6401/57100197/91/583097/90/501097/6000/93/95/99.

To activate Call Progress enter Program Mode from Zoo Keeper and enter 8#*. To deactivate enter 8##.

Copyright© 2011 Telcom Research
Last modified: October 16, 2011